Bishons Buildings!!
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
Hi all,
As you probably know I'm the brother of Minoboys here on the forum, but it was getting confusing sharing the account so we made a new one . So now I have my account and I'm making a moc page for myself . Here are some of my latest mocs:
Video for GBC I made once upon a time:
And the golf course video:
As you probably know I'm the brother of Minoboys here on the forum, but it was getting confusing sharing the account so we made a new one . So now I have my account and I'm making a moc page for myself . Here are some of my latest mocs:
Video for GBC I made once upon a time:
And the golf course video:
- Bijlagen
-
- IMG_5313.JPG (4.76 MiB) 5200 keer bekeken
-
- IMG_2296-1.jpg (2.84 MiB) 5200 keer bekeken
-
- CROP.jpg (2.19 MiB) 5200 keer bekeken
- Boindil_Lego
- Premium
- Berichten: 1476
- Lid geworden op: zo nov 08, 2020 9:48 am
- Locatie: Een, Drenthe
- Contacteer:
Ben jij nu de oudste, middelste of jongste van de 3?
Een eigen account met eigen moc-topic is inderdaad minder verwarrend, zo weten we gelijk wat bij wie hoort. Kasteel en molen zijn goed gelukt, vooral de molen spreekt mij aan.
Welkom terug, soort van.
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
Now,Boindil_Lego
Are you now the oldest, middle or youngest of the 3?
I am the youngest of the three. The second oldest brother will not be getting his own account due to lack of typing and spelling skills. May he will join the forum someday. Now that we know I'm the youngest (bishons), and the oldest (minoboys) we can probably stop talking about this. It's driving me nuts.
Thankyou geert_h. Yeah, my personal favorites were (hmm coming to think of it all).
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
I was busy photographing some minifigures outside! One of my favorite activities after a long school day. Here's a link to some photos:
https://sites.google.com/view/bishons-l ... authuser=0
Also been working on the GBC. After a finish school I'm right into it! I had to borrow my brother's lego room to make the track possible. But still a lot of work needs to be done on it
https://sites.google.com/view/bishons-l ... authuser=0
Also been working on the GBC. After a finish school I'm right into it! I had to borrow my brother's lego room to make the track possible. But still a lot of work needs to be done on it
- Bijlagen
-
- GBC on and off train WIP resize.jpg (314.95 KiB) 5046 keer bekeken
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
Yeah, with the help of Dad I kinda got the loading and off-loading mechanism working, but haven't been able to get the balls back to the loading point. The Encyclopedias are handy for this too!
I also enjoy building GBC's as a nice challenge from castle . By the way, here's the progress! (not done yet!):
https://sites.google.com/view/bishons-l ... authuser=0
I also enjoy building GBC's as a nice challenge from castle . By the way, here's the progress! (not done yet!):
https://sites.google.com/view/bishons-l ... authuser=0
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
Hi all!
This is my latest GBC. It's my own design! The balls go on a route that takes them to the loading area, where they get loaded onto the train, and then off the train they go, up the conveyor and down the long corridor back to the start! Some key moments in the video :
End of over-all shots: 2:18
Loading mechanism: 3:05
Un-loading mechanism : 3:47
Here's the video:
This is my latest GBC. It's my own design! The balls go on a route that takes them to the loading area, where they get loaded onto the train, and then off the train they go, up the conveyor and down the long corridor back to the start! Some key moments in the video :
End of over-all shots: 2:18
Loading mechanism: 3:05
Un-loading mechanism : 3:47
Here's the video:
- Stuifzand
- Site Admin
- Berichten: 2090
- Lid geworden op: di nov 03, 2020 10:02 am
- Locatie: Meijel
- Contacteer:
Wat je zou kunnen doen voor de video is op een paar plekken inzoomen. Ik zag pas na een hele tijd wat er nou eigenlijk gebeurde.
Rijdt die trein zelf door of rem je af met de afstandsbediening?
Rijdt die trein zelf door of rem je af met de afstandsbediening?
Werkt prima! Ga je hier nog mee verder?
Leuk gedaan, nu mooi afwerken en je kunt zo in de GBC polonaise mee!!! Ga zo door
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
Thank you all so much for the kind words!
With GBCs: Yes, that's why I ordered some balls. Me and my brother are going to make a GBC collaboration when the balls come
With the train: Possibly. I've always loved trains and love to incorporate them into GBCs. So maybe one day I'll try getting something that goes faster, or maybe I could try more carriages.(hmm good idea actually)
Oh yeah, you can skip the start 2 minutes if you want. The train goes buy itself : I don't have to touch anything, but it's there to keep the train motor on a slow speed.
With this GBC or with GBCs?
With GBCs: Yes, that's why I ordered some balls. Me and my brother are going to make a GBC collaboration when the balls come
With the train: Possibly. I've always loved trains and love to incorporate them into GBCs. So maybe one day I'll try getting something that goes faster, or maybe I could try more carriages.(hmm good idea actually)
Thank you! Really makes me smile
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
Hi, these are my latest GBCs. The first one is the scissor ball pump GBC:
It uses a pair of steps and then a scissor lift to transport the balls to the top of the cylinder. Then they go back down the track ≡O
Next one is a spinning wheel fastness. It is pretty simple, but effective I thought. It is so fast, and I loved changing the speeds. I later upgraded it to a miniloop with another conveyor:
These will probably be part of the GBC collab. Also just to let you know, those aren't the fake balls I am getting, they are just a test balls I got before I knew that I needed 14mm balls.
Thanks for looking
It uses a pair of steps and then a scissor lift to transport the balls to the top of the cylinder. Then they go back down the track ≡O
Next one is a spinning wheel fastness. It is pretty simple, but effective I thought. It is so fast, and I loved changing the speeds. I later upgraded it to a miniloop with another conveyor:
These will probably be part of the GBC collab. Also just to let you know, those aren't the fake balls I am getting, they are just a test balls I got before I knew that I needed 14mm balls.
Thanks for looking
Cool met die raampjes waar je door naar binnen kunt kijken
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
Hi
Started working on a robot GBC like "robot dreams" or "catch and spin robots" but different: my own design. A little problem arose:
I cannot get the ball to properly grab into the robot arm without falling out. Any chance you could help? (meanwhile I wait for a response I can try experiment)
Looking forward to any comments or suggestions on how to get that working.
Started working on a robot GBC like "robot dreams" or "catch and spin robots" but different: my own design. A little problem arose:
I cannot get the ball to properly grab into the robot arm without falling out. Any chance you could help? (meanwhile I wait for a response I can try experiment)
Looking forward to any comments or suggestions on how to get that working.
- Bijlagen
-
- robot dreams problem.jpg (188.4 KiB) 4383 keer bekeken
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
Hi!
I solved it sort of. I made a stepper and then used a 4x4 crows nest where at the right time the stepper will activate to make two or one ball go onto the robot arm, then the robot will swing and drop the balls, and come back.
Also made my very own GBC ball cup
I solved it sort of. I made a stepper and then used a 4x4 crows nest where at the right time the stepper will activate to make two or one ball go onto the robot arm, then the robot will swing and drop the balls, and come back.
Also made my very own GBC ball cup
- Bijlagen
-
- robot dreams - change.jpg (77.27 KiB) 4325 keer bekeken
-
- GBC ball cup.jpg (64.85 KiB) 4325 keer bekeken
Leuk principe!
De afstelling moet denk ik nog iets beter, er gaat nog weleens een bal naast. En hoe lang blijft alles heel? Komen er geen slijtplekken op?
Maar nogmaals, het idee vind ik leuk!
De afstelling moet denk ik nog iets beter, er gaat nog weleens een bal naast. En hoe lang blijft alles heel? Komen er geen slijtplekken op?
Maar nogmaals, het idee vind ik leuk!
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
Thanks @Klaask. I checked and the a ball drops 1 out of 34. Everything stays in tact that I've seen and I never see any mishaps with the mechanism (after it was finished of course). I don't know about scuff marks yet. It's only been going 15-20 minutes
"I like the idea" Yes, it was inspired by JK BrickWorks famous "Robot dreams" and was supposed to be like this:
"I like the idea" Yes, it was inspired by JK BrickWorks famous "Robot dreams" and was supposed to be like this:
- Afol71
- Premium
- Berichten: 1560
- Lid geworden op: do feb 18, 2021 2:48 pm
- Locatie: Tussen R’daal en BoZ
Leuk ontwerp!
Ik heb nog nooit een GBC gebouwd, maar vind op zich het concept leuk dat de bucket beweegt door middel van zwaartekracht en niet door een mechanische aandrijving. Ik ben benieuwd naar de betrouwbaarheid
Ik heb nog nooit een GBC gebouwd, maar vind op zich het concept leuk dat de bucket beweegt door middel van zwaartekracht en niet door een mechanische aandrijving. Ik ben benieuwd naar de betrouwbaarheid
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
Preparations for a collaboration ! On the dinner table... only with my older brother...
- Bijlagen
-
- preparations for collaborations!1.jpg (258.28 KiB) 3975 keer bekeken
-
- preparations for collaborations!.jpg (284.48 KiB) 3975 keer bekeken
- Bishons
- Berichten: 1049
- Lid geworden op: vr jan 28, 2022 9:20 pm
- Locatie: Australia (same residence as MinoBoys)
- Contacteer:
This is the GBC collaboration with my older brother (finally, my YouTube been down. I had to use my sister's computer). Well we had a great day(s) and here and some photos ( in the link of course):
https://sites.google.com/view/bishons-l ... authuser=0
Anyway here are some videos.
In this video, follow the ball with a simie face drawn on it and follow it around the whole track and back to the start!
This video is just showing you around the GBCs, not following any particular ball.
This is also a better video of the shooter GBC:
https://sites.google.com/view/bishons-l ... authuser=0
Anyway here are some videos.
In this video, follow the ball with a simie face drawn on it and follow it around the whole track and back to the start!
This video is just showing you around the GBCs, not following any particular ball.
This is also a better video of the shooter GBC:
- Boindil_Lego
- Premium
- Berichten: 1476
- Lid geworden op: zo nov 08, 2020 9:48 am
- Locatie: Een, Drenthe
- Contacteer:
Leuk gemaakt! Kleine tip: ruim volgende keer de tafel even op voor je gaat filmen. Ik vind het persoonlijk behoorlijk afleiden.